A truck is not managed like a company car. It travels far, often at night, carries goods whose delivery the customer wants proof of, and burns enough diesel for every lost litre to show up in the accounts. For a transport company in Morocco, a truck GPS tracker is therefore not a location gadget: it is a tool for running the business. It still has to be a solution built for heavy vehicles, not a simple car tracker dropped into a cab.
The short answer: a good truck GPS tracker combines a professional wired installation, real-time tracking and trip history, fuel monitoring through a calibrated probe or through CAN BUS depending on compatibility, configurable alerts and exportable reports. For refrigerated transport, add temperature sensors.
What does a transport company need?
Hauliers’ needs are similar from one company to another, whether in national transport, regional distribution or deliveries to ports.
Tracking long trips
On a trip of several hundred kilometres, the dispatcher needs to know where each truck is, whether it is stopped or moving, and when it will arrive. The history then makes it possible to check the route actually taken, the stops and how long they lasted.
Controlling fuel
Diesel is one of the heaviest expenses of a truck fleet. Gaps come from several sources: harsh driving, long idling, detours, but also siphoning or refuels declared higher than reality. Without a reliable measurement, you can neither tell these causes apart nor act on them.
Managing driving behaviour
Speeding, use outside working hours, unplanned stops: these behaviours cost fuel, wear and safety. The goal is not to watch for the sake of watching, but to have facts to discuss with drivers.
Proving delivery
When a customer disputes an arrival time or a visit, the GPS history gives a factual answer: time of entry into and exit from a zone, length of the stop at the delivery site, route taken.
Keeping the cold chain
For fresh, frozen or pharmaceutical goods, position is not enough. You need to know the temperature in the box throughout the trip, be alerted when it goes out of range and be able to show the history.
What should you require from a truck GPS tracker?
Here is the checklist to use before choosing a solution:
- Professional wired installation: the device is connected to the truck’s power supply by a technician, fitted discreetly and checked after installation. A battery or cigarette-lighter tracker is not suited to intensive use.
- Real-time tracking and history: position, trips, stops, durations.
- Geographic zones: depots, customers, ports, with entry and exit alerts.
- Configurable alerts: speed, out-of-hours use, zone entry or exit.
- Fuel monitoring: calibrated probe in the tank, or CAN BUS reading depending on the truck’s compatibility.
- Temperature sensors for refrigerated trucks.
- Exportable reports and, if needed, integration with your ERP or TMS.
- Mobile app for managers on the move.
- Reachable support by phone or WhatsApp.
- Hardware warranty over a period that covers your use.
Fuel probe or CAN BUS: what is the difference?
There are two main ways to get fuel data from a truck.
The fuel probe is installed in the tank and measures the level directly. Once calibrated to the shape and capacity of the tank, it lets you follow the level, spot refuels and detect suspicious drops. It is the reference method for checking the fuel actually in the tank.
CAN BUS is the vehicle’s electronic network. On some trucks, it can be used to read information sent by the vehicle itself. This depends on the model and its compatibility: it is checked case by case, before installation.
| Criterion | Calibrated fuel probe | CAN BUS reading |
|---|---|---|
| Data source | Direct measurement of the level in the tank | Information sent by the vehicle |
| Availability | Depending on the tank, with calibration | Depending on the truck’s compatibility |
| Installation | Fitting and calibration by a technician | Connection to the vehicle’s network |
| Typical use | Checking refuels and suspicious drops | Vehicle data, depending on the model |
If in doubt, ask the supplier to check your truck model before choosing.
How do you detect diesel theft on a truck?
Fuel theft first shows up as an inconsistency. With a calibrated probe, the platform records the level curve continuously. A rapid drop while the truck is stopped stands out clearly, with the time and place. A declared refuel larger than the measured increase also stands out.
The recommended approach:
- measure the real level with a calibrated probe on each tank;
- spot suspicious drops, time-stamped and located;
- cross-check these events with the trip history and stops;
- compare detected refuels with receipts and invoices;
- discuss with the team on the basis of these facts.
This factual report works both ways: it lets you act when there is a problem, and clear a suspicion when there is none. To go further, the fuel monitoring page explains how the MINTA PRO FUEL probe works.
How do you protect a truck against theft?
Abnormal-use alerts, such as a start outside working hours or a zone exit, let you react quickly, and the real-time position helps locate the vehicle.
On the MINTA TRACKER platform, remote engine cut-off is manual: it is triggered by an authorised user, only when the vehicle is stopped or moving very slowly, always triggered by you, never without your action. On the platform, a warning is displayed above 20 km/h.
How do you use the data day to day?
Data is only useful if someone reads it. Two levers help teams:
Reports and export. Trips, stops, kilometres, fuel, alerts: these reports support invoicing, cost control and discussions with customers. For companies using an ERP or TMS, an integration can be studied on quotation.
The AI assistant. On MINTA TRACKER, an AI assistant answers written questions in French, Arabic or Darija, for example: “which trucks were driven out of hours this week?”. It prepares reports in PDF, Excel or another format and suggests ways to save. It reads the data; it changes nothing. Voice notes are coming soon. See the AI assistant page.
What about refrigerated transport?
For a refrigerated truck, temperature sensors send the reading continuously. You set thresholds, the platform sends an alert when they are exceeded, and the history remains available for each trip. Details are on the temperature and cold chain page.
Frequently asked questions
Is a car tracker suitable for a truck?
A truck needs a wired installation on its power supply, done by a technician, and often sensors (fuel, temperature). So you need a device that can take them and a platform with reports suited to transport.
Does CAN BUS replace the fuel probe?
Not always. CAN BUS reading depends on each truck’s compatibility. The calibrated probe measures the level in the tank directly. The choice is made after checking the model.
Can drivers know that the truck is tracked?
Yes, and it is recommended. Informing drivers is part of a transparent approach. In Morocco, the processing of personal data is governed by Law 09-08.
Can a large truck fleet be tracked on a single platform?
Yes. All vehicles appear on the same web platform and on the Android app. For specific needs (ERP or TMS integration, CAN BUS, sensors), see the large fleets page.
In short
A useful truck GPS tracker combines a serious installation, reliable fuel data, and alerts and reports your teams actually read. MINTA TRACKER has been an integrator and installer since 2023: more than 1,500 trackers installed, more than 450 client companies, installations in more than 17 cities, quickly and by appointment, with hardware guaranteed for 5 years. MINTA PRO 4G Pack at MAD 1,100 incl. VAT (device, installation and the first 15 months free), Fuel Pack at MAD 3,000 incl. VAT with the first 15 months free, and quotations for large fleets. Data is hosted in the European Union (Germany). To discuss your fleet, contact us.